HEW10

$129.99

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Don't have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."

Categories: HEW Subwoofers, Subwoofer

Description
Additional information

Download Manual

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Additional information

Weight	6.6 lbs
Dimensions	11.4173 × 11.4173 × 5.31496 in

Our engineers at Hypnotic have designed this subwoofer from the ground up to shake the ground up. The double stitched foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

1.5″ KSV Voice Coil
PP Cone W/ Foam Surround
Injection Molded PP Dust Cap
High Energy Strontium Ferrite Magnet
Convection Vented Monolithic Forged Yoke
Electro-plated finished Top and Bumped Bottom Plate
CAD Optimized Electro Mechanical and Magnetic Design
Low Stress Connecting Leads
Poly-Cotton Spider
Fast On Speaker Terminals

Physical Structure

Outside Diameter (A)	10.11″ (257mm)
Cutout Diameter (B)	9.05″ (230mm)
Mounting Depth (C)	4.05″ (103mm)

General Specifications
Structure	10″ (25.4cm) Woofer
Dynamic Power Handling	900 Watts
Nominal Power Handling	450 Watts
Impedance	Single 4Ω Voice Coil

Parameters
Resonant Frequency (fs)	31.45Hz
D.C. Voice Coil Resistance (Re)	3.6Ω
Mechanical Quality Factor (Qms)	7.325
Electrical Quality Factor (Qes)	0.7
Total Quality Factor (Qts)	0.639
Equivalent Air Volume to Cms (Vas)	69.2 L
Mass of Diaphragm/Coil (Mms)	75.926 g
Force Factor (Bl)	8.908

Recommended Enclosures

Woofer Cut-out	9.15″ (230mm)
Mounting Depth	4.56″ (116mm)
Sealed Box	1.0 ft³ (28.31L)
Vented Box	1.37 ft³ (38.79L)
? Vent Area	4 in² (25.80 cm²)
? Vent Length	18″ (45.72 cm)
? Tuning	39Hz
Dynamic Power	900 Watts
Nominal Power	450 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).