HW12D4

$199.99

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Don't have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."

Categories: HW Subwoofers, Subwoofer

Description
Additional information

Download Manual

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Additional information

Weight	10.12 lbs
Dimensions	13.189 × 13.189 × 6.77165 in

Our engineers at Hypnotic have designed this subwoofer from the ground up to shake the ground up. The foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

2Ω DVC Voice Coil
PP Cone W/ Foam Surround
Injection Molded PP Dust Cap
High Energy Strontium Ferrite Magnet
Convection Vented Monolithic Forged Yoke
Electro-plated finished Top and Bumped Bottom Plate
CAD Optimized Electro Mechanical and Magnetic Design
Low Stress Connecting Leads
Poly-Cotton Spider
Fast On Speaker Terminals

Physical Structure

Outside Diameter (A)	12.40″ (315mm)
Cutout Diameter (B)	10.82″ (275mm)
Mounting Depth (C)	5.31″ (135mm)

General Specifications
Structure	12″ (30.48cm) Woofer
Dynamic Power Handling	1500 Watts
Nominal Power Handling	300 Watts
Impedance	Dual 4Ω Voice Coil

Parameters
(Qes) Electrical Quality Factor	1.057
(Qms) Mechanical Quality Factor	3.926
(Qts) Total Quality Factor	0.833
(fs) Resonant Frequency	32.810 Hz
(Re) D.C. Voice Coil Resistance	3.2Ω x 2
(Pe) Thermal Power Handling	350/1500
(Cms) Suspension Compliance	199.456 mm/N
(Vas) Equivalent Compliance Volume	79.838 L
(SPL) Sound Pressure Level	86.1 dB
(Xmax) Maximum Linear Excursion	12 mm
(Mms) Mass of Diaphragm/Coil	117.969 g
(BL) Force Factor	12.134 N/A

Recommended Enclosures

Woofer Cut-out	10.82″ (275mm)
Mounting Depth	5.31″ (135mm)
Sealed Box	1.15 ft³ (32.56L)
Vented Box	1.42 ft³ (40.20L)
Vent Area	4 in² (25.80 cm²)
Vent Length	18″ (45.72 cm)
Tuning	39Hz
Dynamic Power	1500 Watts
Nominal Power	300 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).