HWP12
$349.99
Additional information
Weight | 6.6 lbs |
---|---|
Dimensions | 11.4173 × 11.4173 × 5.31496 in |
Our engineers at Hypnotic have designed this subwoofer from the ground up to shake the ground up. The double stitched foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.
- 12″ 4Ω DVC Subwoofer
- 2.5″ High Temperature Voice coil
- Non-pressed Paper cone
- Double stitched foam surround
- High Roll Foam Surround
- Heavy Gauge Die-cast aluminum basket
- Wrap Around Mounting Gasket
- Heavy Gauge Spring Terminals
- Protective magnet cover
- 120oz Motor Structure
Physical Structure
Outside Diameter (A) | 12.9″ (327mm) |
Cutout Diameter (B) | 11″ (279.74mm) |
Mounting Depth (C) | 6.25″ (159mm) |
General Specifications | |
---|---|
Structure | 12″ (30.48cm) Woofer |
Dynamic Power Handling | 2000 Watts |
Nominal Power Handling | 1000 Watts |
Impedance | Dual 4Ω Voice Coil |
Parameters | |
---|---|
Resonant Frequency (fs) | 40.268Hz |
D.C. Voice Coil Resistance (Re) | 3.4 x 3.4Ω |
Mechanical Quality Factor (Qms) | 4.054 |
Electrical Quality Factor (Qes) | 0.538 |
Total Quality Factor (Qts) | 0.475 |
Equivalent Air Volume to Cms (Vas) | 28.035 L |
Mass of Diaphragm/Coil (Mms) | 223.040 g |
Force Factor (Bl) | 10.243 |
Recommended Enclosures
Woofer Cut-out | 11.02″ (280mm) |
Mounting Depth | 6.88″ (175mm) |
Sealed Box | 1.60 ft3 (45.30L) |
Vented Box | 1.75 ft3 (49.55L) |
? Vent Area | 12.57 in2 (81.09 cm2) |
? Vent Length | 15″ (5.9 cm) |
? Tuning | 35Hz |
Dynamic Power | 2000 Watts |
Nominal Power | 1000 Watts |
Wiring Configuration
You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.
Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)
Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)
Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).
Reviews(0)
There are no reviews yet.